UCC27211DDAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27211 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4A |
| Output Current | 4A |
| Max Supply Current | 4.3mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 400 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7.2ns 5.5ns |
| Channel Type | Independent |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.3V 2.8V |
| Turn Off Time | 0.4 μs |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27211DDAR Overview
The 8-PowerSOIC (0.154, 3.90mm Width) package offers greater flexibility.The packaging method is indicated by Cut Tape (CT).Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 8V~17V, it can demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -40°C~140°C TJ.Non-Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.Many related parts can be found under its base part number UCC27211.Mosfet driver is mounted using Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.There is a maximum output current of 4.5A.There are several useful electronic components within its subcategory MOSFET Drivers.8 pins are present on the component.High-side voltage - Max (Bootstrap) can be as low as 120V.Based on its basis, it integrates 2 outputs.This device supports a current output of 4A at the output.If you want a stable supply current, you should keep it at 4.3mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
UCC27211DDAR Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
UCC27211DDAR Applications
There are a lot of Texas Instruments UCC27211DDAR gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Industrial Motor Inverter - Power Tools, Robotics
- Digitally controlled power supplies
- Automotive Applications
- PCMCIA applications
- Portable computers
- General Purpose 3-Phase Inverter
- Power factor correction (PFC) circuits
- Solar inverters
- Head-up and Head mounted displays
