UCC27211DPRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | UCC27211 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4A |
| Output Current | 4A |
| Max Supply Current | 4.3mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 400 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7.2ns 5.5ns |
| Channel Type | Independent |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.3V 2.7V |
| Turn Off Time | 0.4 μs |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27211DPRT Overview
A higher degree of flexibility is achieved by adopting its 10-WDFN Exposed Pad package.Gate drivers is packaged in the way of Tape & Reel (TR).Its recommended mounting way is Surface Mount.When the supply voltage is set to 8V~17V, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.There is a temperature range for this device of -40°C~140°C TJ.The input type is Non-Inverting.Mosfet driver consists of 10 terminations as Mosfet drivers foundation.There are numerous related parts listed under its base part number UCC27211.In this case, Surface Mount indicates how the device is mounted.There are 10 pins available in the device.In order to operate, a voltage of 12V has to be applied.The maximum output current can amount to 4A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Components with 10 pins are available.There can be a voltage up to 120V on the high-side (Bootstrap).Based on its basis, it integrates 2 outputs.The output current can be set to 4A.If you want a stable supply current, you should keep it at 4.3mA.During the operation of the system, the voltage of the operating supply should be set to 12V.
UCC27211DPRT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 120V
UCC27211DPRT Applications
There are a lot of Texas Instruments UCC27211DPRT gate drivers applications.
- High power buffers
- Dual-Battery Systems
- High-voltage isolated DC-DC converters
- UPS systems
- Industrial Motor Inverter - Power Tools, Robotics
- Welding
- Smart Phones
- Commercial and agricultural vehicles (CAV)
- Solar inverters
- High-speed communications
