UCC27221PWP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -55°C~115°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 3W |
| Voltage - Supply | 3.7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | UCC27221 |
| Pin Count | 14 |
| Max Output Current | 3.3mA |
| Nominal Supply Current | 100mA |
| Power Dissipation | 3W |
| Output Current | 3A |
| Max Supply Current | 100mA |
| Input Type | Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 17ns 17ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3.3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.7V 2.6V |
| Turn Off Time | 0.11 μs |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27221PWP Overview
There is greater flexibility with the 14-PowerTSSOP (0.173, 4.40mm Width) package.Gate drivers is package in Tube case.This configuration includes 2 drivers.Surface Mount is mounted in the way of the device.When the supply voltage is 3.7V~20V it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -55°C~115°C TJ.Inverting is the input type used in this program.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UCC27221.Mounting the device requires Surface Mount.During design, it is configured with 14 pins.This device operates with 12V supply voltage.In the maximum case, the output current can be 3.3mA volts.The board contains 14 pins for component connections.3A is the maximum output current supported by the device.The maximum power dissipation of 3W shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 100mA to ensure greater stabilMosfet gate driversy.By using the frequency 500kHz, we can increase efficiency.
UCC27221PWP Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
Maximum power dissipation of 3W
UCC27221PWP Applications
There are a lot of Texas Instruments UCC27221PWP gate drivers applications.
- UPS systems
- Commercial and agricultural vehicles (CAV)
- Isolated Gate Driver Supplies
- Isolated Supplies for Motor Control
- RGB applications
- Telecom switch mode power supplies
- Video amplifiers
- LCD/LCoS/DLP portable and embedded pico projectors
- Welding
- High power buffers
