UCC27221PWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -55°C~115°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 3W |
| Voltage - Supply | 3.7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27221 |
| Pin Count | 14 |
| Max Output Current | 3.3mA |
| Nominal Supply Current | 100mA |
| Power Dissipation | 3W |
| Output Current | 3A |
| Max Supply Current | 100mA |
| Input Type | Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 17ns 17ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3.3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.7V 2.6V |
| Turn Off Time | 0.11 µs |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27221PWPRG4 Overview
Gate drivers provides greater flexibilGate driversy to use the 14-PowerTSSOP (0.173, 4.40mm Width) package.Tape & Reel (TR) represents the package.2 drivers are incorporated for its configuration.There is a mounting bracket in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 3.7V~20V supply voltage.The gate type on this device is N-Channel MOSFET.There is a temperature range for this device of -55°C~115°C TJ.Inverting is the input type used in this program.Mosfet driver is based on 14 terminations.The base part number UCC27221 refers to a number of related parts.Mosfet driver is mounted using Surface Mount.There are 14 pins available in the device.Specification is for 12V supply voltage operation.As a maximum, there is 3.3mA limit to the output current.The component has 14 pins.The device is capable of delivering a current of 3A.The maximum power dissipation of 3W shows its maximum capability to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 100mA.
UCC27221PWPRG4 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
Maximum power dissipation of 3W
UCC27221PWPRG4 Applications
There are a lot of Texas Instruments UCC27221PWPRG4 gate drivers applications.
- Industrial Power Supplies
- Motor controllers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
- Commercial and agricultural vehicles (CAV)
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- serial peripheral interface (SPI), I2C
- Refrigerator
- High frequency line drivers
