UCC27222PWPG4
| Parameters | |
|---|---|
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.7V 2.6V |
| Turn Off Time | 0.11 μs |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -55°C~115°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 3W |
| Voltage - Supply | 3.7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27222 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Max Output Current | 3.3mA |
| Nominal Supply Current | 100mA |
| Power Dissipation | 3W |
| Output Current | 3A |
| Max Supply Current | 100mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 17ns 17ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 3.3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
UCC27222PWPG4 Overview
In order to increase flexibility, the package 14-PowerTSSOP (0.173, 4.40mm Width) is used.The packaging method is indicated by Tube.There is a mounting bracket in the way of Surface Mount.In the absence of a 3.7V~20V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.The allowable temperature range that this device can be operated in is -55°C~115°C TJ.Non-Inverting is used as the input type.Mosfet driver is based on 14 terminations.Many related parts can be found under its base part number UCC27222.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 14 pins.Mosfet driver is designed specifically to run on 12V volts of power.The maximum output current can amount to 3.3mA.On the board, there are 14 component pins.In terms of its basis, there are 2 outputs integrated.Mosfet gate drivers supports a current output of 3A.Considering its maximum power dissipation, 3W shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 100mA.
UCC27222PWPG4 Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
14 pins
Maximum power dissipation of 3W
UCC27222PWPG4 Applications
There are a lot of Texas Instruments UCC27222PWPG4 gate drivers applications.
- High power buffers
- Isolated Gate Driver Supplies
- Smart Phones
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Supplies for Motor Control
- Industrial Power Supplies
- Portable Navigation Devices
- Dual-Battery Systems
- Portable computers
