UCC27223PWPG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | HTSSOP EP |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Max Output Current | 3.3A |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 8.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation-Max | 3W |
| Nominal Supply Current | 100mA |
| Power Dissipation | 3W |
| Max Supply Current | 100mA |
| Current - Output | 3A |
| Input Voltage (Min) | 4.4V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 35 ns |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 500kHz |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC27223PWPG4 Overview
For greater flexibility, the HTSSOP EP package is adopted.Mosfet driver is based on 14 terminations.In this case, Surface Mount indicates how the device is to be mounted.Devices have 14 pins available.In the maximum case, the output current can be 3.3A volts.Within this subcategory of Switching Regulator or Controllers, there are several useful electronic components.On the board, there are 14 component pins.For its basis, there are 2 outputs integrated.Mosfet gate drivers is permissible to set the operating temperature to 105°C.Operating temperatures can be as low as -40°C.To maintain higher stability, the supply current should always be 100mA.In order for the device to operate, the supply voltage must be 20V.A supply voltage of 8.5V is the minimum value required to operate the device.Mosfet gate drivers outputs a current of 3A at the moment.A SWITCHING CONTROLLER is used as the analog IC.
UCC27223PWPG4 Features
14 pins
UCC27223PWPG4 Applications
There are a lot of Texas Instruments UCC27223PWPG4 gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- Video amplifiers
- Solar power supplies
- Motor Control
- RGB applications
- Isolated Supplies for controller area network (CAN),
- Automotive Applications
- AC-DC Inverters
- Broadcast equipment
- Isolated switch mode power supplies (SMPS)
