UCC27223PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -55°C~115°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 3.7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | UCC27223 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Max Output Current | 3.3mA |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 100mA |
| Power Dissipation | 3W |
| Output Current | 3A |
| Max Supply Current | 100mA |
| Input Type | Non-Inverting |
| Input Voltage (Min) | 4.4V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 17ns 17ns |
| Switching Frequency-Max | 500kHz |
| Channel Type | Synchronous |
| Output Voltage-Max | 6.8V |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 1.55V 2.25V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27223PWPR Overview
A higher degree of flexibility is achieved by adopting its 14-PowerTSSOP (0.173, 4.40mm Width) package.Tape & Reel (TR) represents the package.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is 3.7V~20V it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.There is a temperature range for this device of -55°C~115°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is based on 14 terminations.Numerous related parts can be found under its base part number UCC27223.Mosfet driver is mounted using the Surface Mount method.When the device is designed, it has 14 pins.In the maximum case, the output current can be limited to 3.3mA.There are several useful electronic components in this subcategory of Switching Regulator or Controllers.A total of 14 pins are available for component connections.In terms of its basis, there are 2 outputs integrated.The output current supported by the device is 3A.3W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.If you want a stable supply current, you should keep it at 100mA.Mosfet driver ic adopts SWITCHING CONTROLLER as Mosfet driver ics analog IC.
UCC27223PWPR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
14 pins
Maximum power dissipation of 3W
UCC27223PWPR Applications
There are a lot of Texas Instruments UCC27223PWPR gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Active filtering
- Portable Navigation Devices
- Isolated Supplies for controller area network (CAN),
- Commercial air-conditioning (CAC)
- Commercial and agricultural vehicles (CAV)
- Welding
- Isolated switch mode power supplies (SMPS)
- Isolated Gate Driver Supplies
- DC-DC Converters
