UCC27321D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | UCC27321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 150mV |
| Max Output Current | 9A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27321D Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tube represents the packaging method.Surface Mount is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~15V.N-Channel, P-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~105°C TA.Inverting is used as its input type.Initially, the configuration is composed of 8 terminations.The base part number UCC27321 refers to a number of related parts.In this case, Surface Mount indicates how the device is to be mounted.The pins are configured with 8 when designing the chip.With a supply voltage of 14V, it is designed to operate.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is a maximum output current of 9A.There are several useful electronic components in this subcategory of MOSFET Drivers.There are 8 component pins on the board.The basis of this system consists of 1 outputs.The output current supported by the device is 9A.Its maximum power dissipation of 650mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended that you keep the supply current at 650μA in order to achieve greater stabilMosfet gate driversy.When this voltage is produced, it is marked as 150mV.
UCC27321D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27321D Applications
There are a lot of Texas Instruments UCC27321D gate drivers applications.
- Industrial Power Supplies
- Motor Controls
- Isolated Supplies for Motor Control
- High power buffers
- Industrial motor drives - compact, standard, premium, servo drives
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Solar inverters
- General Purpose 3-Phase Inverter
- Digitally controlled power supplies
- Motor controllers
