UCC27321DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 150mV |
| Max Output Current | 9A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 3W |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.07 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27321DGN Overview
In order to increase flexibility, the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad is used.A packaging method of Tube is used.Surface Mount is mounted in the way.WGate driversh a 4V~15V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.There is a gate type of N-Channel, P-Channel MOSFET in this design.The allowable temperature range that this device can be operated in is -40°C~105°C TA.This program uses the input type of Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27321.Devices are mounted by Surface Mount.In the device, there are 8 pins.A supply voltage of 14V is required for operation.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.The maximum output current can amount to 9A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The number of component pins is 8.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.This device supports a current output of 9A at the output.Considering its maximum power dissipation, 3W shows its maximum capacity to transfer and conduct power loss without overheating.To increase stability, keep the supply current at 650μA.As a result, a voltage of 150mV is produced.
UCC27321DGN Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC27321DGN Applications
There are a lot of Texas Instruments UCC27321DGN gate drivers applications.
- UPS systems
- Power factor correction (PFC) circuits
- Welding
- A/D drivers
- Broadcast equipment
- 3-Phase Motor Inverter Driver
- Portable computers
- Telecom switch mode power supplies
- Automotive Applications
- Commercial and agricultural vehicles (CAV)
