UCC27321DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | UCC27321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27321DR Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A package of Tape & Reel (TR) has been used.Surface Mount is mounted in the way of the device.By using 4V~15V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~105°C TA.Mosfet driver accepts input of type Inverting.8 terminations constitute its foundation.There are various parts that can be found under its base part number UCC27321.Mounting the device requires Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 14V.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 9A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.The basis of the model has 1 outputs integrated.9A is the maximum output current supported by the device.The maximum power dissipation of 650mW shows its maximum capability to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 650μA.
UCC27321DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27321DR Applications
There are a lot of Texas Instruments UCC27321DR gate drivers applications.
- Automotive Applications
- Industrial Modules
- Telecom switch mode power supplies
- Power factor correction (PFC) circuits
- Head-up and Head mounted displays
- General Purpose 3-Phase Inverter
- Pulse transformer drivers
- Motor Controls
- UPS systems
- serial peripheral interface (SPI), I2C
