UCC27321P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 350mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UCC27321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 150mV |
| Max Output Current | 9A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 350mW |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27321P Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube is the packaging method.The device is mounted in the direction of Through Hole.WGate driversh a 4V~15V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel, P-Channel MOSFET has been used in its design.Temperature range -40°C~105°C TA is allowed for this device.Inverting is used as the input type.The configuration starts with 8 terminations.You will find various related parts under the base part number UCC27321.The device is mounted with Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 14V volts of power.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.The maximum output current can amount to 9A.Several electronic components are included in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.The basis of this system consists of 1 outputs.The output current supported by the device is 9A.Its maximum power dissipation of 350mW also demonstrates its maximum ability to transfer power without overheating.As a precaution, make sure the supply current is kept at 650μA.In this case, it outputs 150mV voltage.
UCC27321P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 350mW
UCC27321P Applications
There are a lot of Texas Instruments UCC27321P gate drivers applications.
- Portable Media Players
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Line drivers
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Topologies
- Broadcast equipment
- Industrial Modules
- DC/DC converters
- 3-Phase Motor Inverter Driver
