UCC27321QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC27321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 95 ns |
| Input Type | Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 20 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.075 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.075 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27321QDRQ1 Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A package of Tape & Reel (TR) has been used.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is set to 4V~15V, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.This device allows temperatures in the range of -40°C~105°C TA.Inverting is the input type used in this program.Initially, the configuration is composed of 8 terminations.Many related parts can be found under its base part number UCC27321.Mounting the device requires Surface Mount.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 14V.As its interface IC, NAND GATE BASED MOSFET DRIVER is being employed.In the maximum case, the output current can be limited to 9A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.There are 8 component pins on the board.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.Mosfet gate drivers supports a current output of 9A.Its maximum power dissipation of 650mW shows its power loss capacity without overheating.To ensure high stability, the supply current should be kept at 650μA.This gate driver belongs to the Automotive, AEC-Q100 series.
UCC27321QDRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
Operating with the supply voltage of Automotive, AEC-Q100
UCC27321QDRQ1 Applications
There are a lot of Texas Instruments UCC27321QDRQ1 gate drivers applications.
- Industrial Modules
- Portable Navigation Devices
- Motor controllers
- High-speed communications
- Isolated Supplies for controller area network (CAN),
- High frequency line drivers
- RGB applications
- General Purpose 3-Phase Inverter
- Motor Drives
- Telecom switch mode power supplies
