UCC27322DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27322 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 3W |
| Output Current | 9A |
| Max Supply Current | 1mA |
| Propagation Delay | 70 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27322DGNR Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is adopted for higher flexibility.Tape & Reel (TR) represents the packaging method.It's mounted on the way to Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~15V.N-Channel, P-Channel MOSFET is the gate type used for this design.For this device, the temperature range is -40°C~105°C TA.Non-Inverting is used as the input type.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27322.Mounting the device requires Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 14V volts of power.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 9A.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 8 component pins is available.There are 1 outputs integrated for its basis.This device is capable of delivering 9A current.Having the maximum power dissipation of 3W indicates its maximum capacity to conduct power losses without overheating.To increase stability, keep the supply current at 1mA.
UCC27322DGNR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC27322DGNR Applications
There are a lot of Texas Instruments UCC27322DGNR gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Isolated Gate Driver Supplies
- Isolated Supplies for controller area network (CAN),
- High-speed communications
- A/D drivers
- Dual-Battery Systems
- Portable Media Players
- Topologies
- Industrial Motor Inverter - Power Tools, Robotics
- Digitally controlled power supplies
