UCC27322DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | UCC27322 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 1mA |
| Propagation Delay | 70 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27322DR Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) represents the package.The device is mounted in the direction of Surface Mount.A supply voltage of 4V~15V demonstrates its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.This device allows temperatures in the range of -40°C~105°C TA.Non-Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 8 terminations.There are various related parts under its base part number UCC27322.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.With a supply voltage of 14V, it is designed to operate.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 9A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.For its basis, 1 outputs are integrated.This device is capable of delivering 9A current.Based on the maximum power dissipation of 650mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 1mA in order to achieve greater stabilMosfet gate driversy.
UCC27322DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27322DR Applications
There are a lot of Texas Instruments UCC27322DR gate drivers applications.
- UPS systems
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- High current laser/LED systems
- Isolated Supplies for Motor Control
- Broadcast equipment
- AC-DC Inverters
- Isolated Supplies for controller area network (CAN),
- PCMCIA applications
- Isolated switch mode power supplies (SMPS)
