UCC27322QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | UCC27322 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 1mA |
| Propagation Delay | 95 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 95 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 75ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.075 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.075 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27322QDRQ1 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.Its recommended mounting way is Surface Mount.Using a 4V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.The gate type on this device is N-Channel, P-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~105°C TA.Mosfet driver accepts input of type Non-Inverting.The configuration is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27322.In this case, Surface Mount indicates how the device is to be mounted.There are 8 pins available in the device.The device is specifically designed to function with a supply voltage of 14V V.The interface chip of the system is NAND GATE BASED MOSFET DRIVER.There is an output current limit of 9A for this device.There are several useful electronic components in this subcategory of MOSFET Drivers.There are 8 component pins on the board.The basis has 1 integrated outputs.The output current can be set to 9A.Its maximum power dissipation of 650mW also demonstrates its maximum ability to transfer power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1mA.There are several gate drivers in the Automotive, AEC-Q100 series, including this one.
UCC27322QDRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
Operating with the supply voltage of Automotive, AEC-Q100
UCC27322QDRQ1 Applications
There are a lot of Texas Instruments UCC27322QDRQ1 gate drivers applications.
- Line drivers
- Motor Control
- Industrial Modules
- Telecom switch mode power supplies
- Isolated switch mode power supplies (SMPS)
- General Purpose 3-Phase Inverter
- Automotive Applications
- Isolated Supplies for controller area network (CAN),
- Portable Media Players
- Welding
