UCC27322TDGKREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | UCC27322 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Power Dissipation | 3W |
| Output Current | 9A |
| Max Supply Current | 1mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27322TDGKREP Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~15V.This device is designed with a N-Channel, P-Channel MOSFET gate type.There is a temperature range for this device of -40°C~105°C TA.This program uses the input type of Non-Inverting.It's configured with 8 terminations.Numerous related parts are available for its base part number UCC27322.Mounting the device requires Surface Mount.Devices have 8 pins available.As its interface IC, HALF BRIDGE BASED MOSFET DRIVER is being employed.9A is the maximum output current.Within this subcategory of MOSFET Drivers, there are several useful electronic components.8 pins are present on the component.For its basis, there are 1 outputs integrated.This device supports a current output of 9A at the output.Having the maximum power dissipation of 3W indicates its maximum capacity to conduct power losses without overheating.As a precaution, make sure the supply current is kept at 1mA.
UCC27322TDGKREP Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC27322TDGKREP Applications
There are a lot of Texas Instruments UCC27322TDGKREP gate drivers applications.
- DC-DC Converters
- Power factor correction (PFC) circuits
- Motor controllers
- Dual-Battery Systems
- Motor Drives
- Isolated Gate Driver Supplies
- Solar inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable Navigation Devices
- Industrial motor drives - compact, standard, premium, servo drives
