UCC27323DGNRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | HTSSOP EP |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 2.12W |
| Nominal Supply Current | 450μA |
| Power Dissipation | 2.12W |
| Max Supply Current | 450μA |
| Current - Output | 4A |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 35 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| High Side Driver | NO |
| Turn Off Time | 0.05 µs |
| Height Seated (Max) | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC27323DGNRG4 Overview
The HTSSOP EP package provides greater flexibility.A package of Tape and Reel has been used.8 terminations constitute its foundation.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Specification is for 14V supply voltage operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 4.5A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 8 component pins is available.In terms of its basis, there are 2 outputs integrated.Mosfet gate drivers is permissible to set the operating temperature to 125°C.Minimum operating temperatures are allowed to be -40°C.Mosfet gate drivers is recommended that you keep the supply current at 450μA in order to achieve greater stabilMosfet gate driversy.In order for the device to operate, the supply voltage must be 15V.For operation, 4.5V is the minimum supply voltage.As a result, the current it emits is 4A.STANDARD is its input.
UCC27323DGNRG4 Features
Embedded in the Tape and Reel package
8 pins
UCC27323DGNRG4 Applications
There are a lot of Texas Instruments UCC27323DGNRG4 gate drivers applications.
- High-speed communications
- Commercial and agricultural vehicles (CAV)
- RGB applications
- Portable Media Players
- High power buffers
- Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Automotive Applications
- Isolated Supplies for Motor Control
- High frequency line drivers
