UCC27323P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 780mW |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27323 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 300mV |
| Max Output Current | 4.5A |
| Operating Supply Voltage | 12V |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 450μA |
| Power Dissipation | 780mW |
| Output Current | 4A |
| Max Supply Current | 450μA |
| Propagation Delay | 35 ns |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Output Characteristics | STANDARD |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27323P Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.Tube represents the packaging method.Through Hole is the way in which it is mounted.When the supply voltage is set to 4.5V~15V, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -55°C~150°C TJ.Input type of Inverting is used.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number UCC27323.You mount it with Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.A voltage of 14V is required for its operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible for the output current to be as low as 4.5A.Its subcategory of MOSFET Drivers contains various useful electronic components.8 pins are present on the component.The basis of the model has 2 outputs integrated.The output current can be set to 4A.Based on its maximum power dissipation of 780mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 450μA in order to achieve greater stabilMosfet gate driversy.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 4.5/15V.When this voltage is produced, it is marked as 300mV.During the operation of the system, the voltage of the operating supply should be set to 12V.
UCC27323P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 780mW
UCC27323P Applications
There are a lot of Texas Instruments UCC27323P gate drivers applications.
- Motor Drives
- Motor controllers
- Isolated Gate Driver Supplies
- Pulse transformer drivers
- Dual-Battery Systems
- White Goods - Air Conditioner, Washing Machine,
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial and agricultural vehicles (CAV)
- Refrigerator
- PCMCIA applications
