UCC27324DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.12W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27324 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 750μA |
| Power Dissipation | 2.12W |
| Output Current | 4A |
| Max Supply Current | 750μA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 23ns |
| Fall Time (Typ) | 23 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27324DGNRG4 Overview
A higher level of flexibility is provided by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.Gate drivers is package in Tape & Reel (TR) case.Its recommended mounting way is Surface Mount.Using a 4.5V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -55°C~150°C TJ.Input type of Non-Inverting is used.8 terminations constitute its foundation.Numerous related parts are available for its base part number UCC27324.Devices are mounted by Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.A voltage of 14V is required for its operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.An output current as high as 4.5A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.The basis has 2 integrated outputs.4A is the maximum output current supported by the device.Having the maximum power dissipation of 2.12W indicates its maximum capacity to conduct power losses without overheating.The supply current should be kept at 750μA to ensure higher stability.Based on its power supplies of 4.5/15V, it solves the problem of power supply failure for a variety of applications.There is a STANDARD value associated with its input.
UCC27324DGNRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 2.12W
UCC27324DGNRG4 Applications
There are a lot of Texas Instruments UCC27324DGNRG4 gate drivers applications.
- General Purpose 3-Phase Inverter
- Telecom switch mode power supplies
- Motor Control
- RGB applications
- High power buffers
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Modules
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
