Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
1.14W |
Technology |
BICMOS |
Voltage - Supply |
4.5V~15V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
14V |
Base Part Number |
UCC27324 |
Pin Count |
8 |
Number of Outputs |
2 |
Max Output Current |
4.5A |
Power Supplies |
4.5/15V |
Nominal Supply Current |
750μA |
Power Dissipation |
1.14W |
Output Current |
4A |
Max Supply Current |
750μA |
Propagation Delay |
35 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
35 ns |
Output Characteristics |
TOTEM-POLE |
Rise Time |
40ns |
Fall Time (Typ) |
40 ns |
Output Polarity |
TRUE |
Input Characteristics |
STANDARD |
Rise / Fall Time (Typ) |
20ns 15ns |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Independent |
Turn On Time |
0.04 µs |
Output Peak Current Limit-Nom |
4A |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
4A 4A |
High Side Driver |
NO |
Logic Voltage - VIL, VIH |
1V 2V |
Turn Off Time |
0.05 µs |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UCC27324DRG4 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~15V, it can demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.For this device, the temperature range is -55°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UCC27324.The device is mounted with Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 14V.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.The maximum output current can amount to 4.5A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The number of component pins is 8.Based on its basis, it integrates 2 outputs.Mosfet driver supports an output current of 4A.Considering its maximum power dissipation, 1.14W shows its maximum capacity to transfer and conduct power loss without overheating.To maintain higher stability, the supply current should always be 750μA.Due to its power supply of 4.5/15V, it provides an effective solution to power supply problems for a wide range of applications.Its input is characterized by the value STANDARD.
UCC27324DRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.14W
UCC27324DRG4 Applications
There are a lot of Texas Instruments UCC27324DRG4 gate drivers applications.
- Isolated Gate Driver Supplies
- High current laser/LED systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor controllers
- DC-DC Converters
- LCD/LCoS/DLP portable and embedded pico projectors
- Head-up and Head mounted displays
- Automotive Applications
- Welding
- Solar inverters