UCC27423DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27423 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.35mA |
| Power Dissipation | 3W |
| Output Current | 4A |
| Max Supply Current | 1.35mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27423DGNR Overview
A higher level of flexibility is provided by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.Tape & Reel (TR) represents the package.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4V~15V supply voltage.N-Channel, P-Channel MOSFET is the gate type used for this design.This device can operate at temperatures up to -40°C~125°C TA.The input type is Inverting.Its configuration starts with 8 terminations.The base part number UCC27423 refers to a number of related parts.Mosfet driver is mounted using Surface Mount.When the device is designed, it has 8 pins.With a supply voltage of 14V, it is designed to operate.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 4A for this device.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Based on its basis, it integrates 2 outputs.The output current supported by the device is 4A.This device has a maximum power dissipation of 3W, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 1.35mA.Using its power supply of 4.5/15V, it provides solutions to diverse power supply problems.
UCC27423DGNR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC27423DGNR Applications
There are a lot of Texas Instruments UCC27423DGNR gate drivers applications.
- Digitally controlled power supplies
- Broadcast equipment
- High-voltage isolated DC-DC converters
- Solar power supplies
- Line drivers
- Smart Phones
- Industrial motor drives - compact, standard, premium, servo drives
- RGB applications
- Isolated Supplies for Motor Control
- Multicolor LED/laser displays
