UCC27423DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27423 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.35mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.35mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27423DR Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).The device is mounted in the direction of Surface Mount.Using a 4V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device allows temperatures in the range of -40°C~125°C TA.Input type of Inverting is used.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UCC27423.Surface Mount is the way it takes to mount the device.Devices have 8 pins available.A voltage of 14V is required for its operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is a maximum output current of 4A.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.In terms of its basis, there are 2 outputs integrated.This device supports a current output of 4A at the output.Using 650mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To increase stability, keep the supply current at 1.35mA.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 4.5/15V.
UCC27423DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27423DR Applications
There are a lot of Texas Instruments UCC27423DR gate drivers applications.
- Digitally controlled power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Drives
- RGB applications
- Commercial and agricultural vehicles (CAV)
- Industrial Modules
- Pulse transformer drivers
- A/D drivers
- Power factor correction (PFC) circuits
- Telecom switch mode power supplies
