UCC27423DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27423 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4mA |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.35mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.35mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27423DRG4 Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.Its recommended mounting way is Surface Mount.In the absence of a power supply voltage of 4V~15V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.There is a temperature range for this device of -40°C~125°C TA.Mosfet driver uses Inverting as Mosfet drivers input type.As a result of its configuration, it contains a maximum of 8 terminations.There are numerous related parts listed under its base part number UCC27423.Surface Mount is the way it takes to mount the device.During design, it is configured with 8 pins.A supply voltage of 14V is required for operation.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 4mA.Its subcategory of MOSFET Drivers contains various useful electronic components.The board contains 8 pins for component connections.Based on its basis, it integrates 2 outputs.The output current supported by the device is 4A.Its maximum power dissipation of 650mW also demonstrates its maximum ability to transfer power without overheating.To ensure high stability, the supply current should be kept at 1.35mA.With its 4.5/15V power supply, it provides power for diverse applications.The input of this function is characterised by STANDARD.
UCC27423DRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27423DRG4 Applications
There are a lot of Texas Instruments UCC27423DRG4 gate drivers applications.
- Isolated Gate Driver Supplies
- Power factor correction (PFC) circuits
- Pulse transformer drivers
- High power buffers
- White Goods - Air Conditioner, Washing Machine,
- Commercial air-conditioning (CAC)
- 3-Phase Motor Inverter Driver
- Refrigerator
- Industrial motor drives - compact, standard, premium, servo drives
- Telecom switch mode power supplies
