UCC27423QDRQ1
| Parameters | |
|---|---|
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27423 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.35mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.35mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
UCC27423QDRQ1 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tape & Reel (TR).Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4V~15V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TA.Inverting is used as the input type in this program.The configuration starts with 8 terminations.The base part number UCC27423 refers to a number of related parts.Mosfet driver is mounted using Surface Mount.In the device, there are 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 14V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4A.This subcategory of MOSFET Drivers has a number of useful electronic components.A board with 8 component pins is available.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.An output current of 4A is supported.Its maximum power dissipation of 650mW shows its power loss capacity without overheating.To ensure high stability, the supply current should be kept at 1.35mA.The power supply 4.5/15V of the product solves the power supply problem for a variety of applications.A gate driver in the Automotive, AEC-Q100 series is included in this document.
UCC27423QDRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
Operating with the supply voltage of Automotive, AEC-Q100
UCC27423QDRQ1 Applications
There are a lot of Texas Instruments UCC27423QDRQ1 gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Digitally controlled power supplies
- Portable computers
- AC-DC Inverters
- DC-DC Converters
- Industrial Modules
- Power factor correction (PFC) circuits
- serial peripheral interface (SPI), I2C
- A/D drivers
- Head-up and Head mounted displays
