UCC27424D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27424 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 330mV |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27424D Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.A packaging method of Tube is used.It's mounted on the way to Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4V~15V supply voltage.This gate type has a N-Channel, P-Channel MOSFET design.This device is allowed to operate in a temperature range of -40°C~125°C TA.This program uses the input type of Non-Inverting.Its configuration is based on a total of 8 terminations.There are numerous related parts listed under its base part number UCC27424.Mounting the device requires Surface Mount.During design, it is configured with 8 pins.The device is specifically designed to function with a supply voltage of 14V V.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 4A volts.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board has a total of 8 component pins.For its basis, 2 outputs are integrated.The output current can be set to 4A.According to its maximum power dissipation, 650mW is capable of conducting and transferring a large amount of power without overheating.The supply current should be kept at 1.8mA to ensure higher stability.Due to its 4.5/15V power supply, it can solve power supply problems for an array of diverse applications.The voltage it outputs is 330mV.
UCC27424D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27424D Applications
There are a lot of Texas Instruments UCC27424D gate drivers applications.
- Refrigerator
- Industrial Power Supplies
- Line drivers
- Uninterruptible Power Supplies (UPS)
- Pulse transformer drivers
- Isolated Supplies for Motor Control
- Telecom switch mode power supplies
- DC/DC converters
- Motor controllers
- Portable Navigation Devices
