UCC27424DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4V |
| Power Dissipation-Max | 650mW |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 650mW |
| Max Supply Current | 1.8mA |
| Current - Output | 4A |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| High Side Driver | NO |
| Turn Off Time | 0.05 µs |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC27424DG4 Overview
There is greater flexibility with the SOIC package.8 terminations constitute its foundation.Devices are mounted by Surface Mount.During design, it is configured with 8 pins.The device is specifically designed to operate at 14V volts.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 4A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 8 component pins.Mosfet driver is based on a basis of 2 outputs that have been integrated.There is a maximum acceptable operating temperature of 105°C.Operating temperatures must not exceed -40°C.To ensure high stability, the supply current should be kept at 1.8mA.The supply voltage of 15V is its maximum value for operation.4V is the minimum voltage required to operate it.Currently, 4A is the current it outputs.The input of this algorithm is characterized by STANDARD.
UCC27424DG4 Features
8 pins
UCC27424DG4 Applications
There are a lot of Texas Instruments UCC27424DG4 gate drivers applications.
- serial peripheral interface (SPI), I2C
- AC-DC Inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Control
- General Purpose 3-Phase Inverter
- Commercial air-conditioning (CAC)
- Pulse transformer drivers
- DC/DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- PCMCIA applications
