UCC27424DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27424 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 3W |
| Output Current | 4A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27424DGNRG4 Overview
A higher level of flexibility is provided by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.A packaging method of Tape & Reel (TR) is used.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is 4V~15V it is able to demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~125°C TA.The input type for this program is Non-Inverting.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27424.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.The device is specifically designed to function with a supply voltage of 14V V.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 4A.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.The basis has 2 integrated outputs.This device supports a current output of 4A at the output.Based on its maximum power dissipation of 3W, it is clear that it is capable of transferring and conducting power loss without overheating.To ensure high stability, the supply current should be kept at 1.8mA.Based on its power supplies of 4.5/15V, it solves the problem of power supply failure for a variety of applications.
UCC27424DGNRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC27424DGNRG4 Applications
There are a lot of Texas Instruments UCC27424DGNRG4 gate drivers applications.
- Welding
- Dual-Battery Systems
- High-voltage isolated DC-DC converters
- Isolated Supplies for Motor Control
- Pulse transformer drivers
- Commercial air-conditioning (CAC)
- Smart Phones
- Telecom switch mode power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High frequency line drivers
