UCC27424DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27424 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27424DRG4 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.Surface Mount is mounted in the way of the device.In the absence of a 4V~15V supply voltage, it can demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.There is a temperature range for this device of -40°C~125°C TA.The input type for this program is Non-Inverting.It's configured with 8 terminations.There are various related parts under its base part number UCC27424.Devices are mounted by Surface Mount.A total of 8 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 14V.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 4A can be achieved at maximum power.Within this subcategory of MOSFET Drivers, there are several useful electronic components.8 pins are present on the component.For its basis, there are 2 outputs integrated.An output current of 4A is supported.The maximum power dissipation of 650mW shows its maximum capability to transfer and conduct power loss without overheating.The supply current should be kept at 1.8mA to ensure higher stability.With its power supplies of 4.5/15V, it solves the problems of power supply for a variety of applications.
UCC27424DRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27424DRG4 Applications
There are a lot of Texas Instruments UCC27424DRG4 gate drivers applications.
- High-voltage isolated DC-DC converters
- Motor Control
- Telecom switch mode power supplies
- Commercial air-conditioning (CAC)
- Active filtering
- General Purpose 3-Phase Inverter
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Power factor correction (PFC) circuits
- A/D drivers
- Solar inverters
