UCC27424P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 350mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27424 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 330mV |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 350mW |
| Output Current | 4A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27424P Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is package in Tube case.Ideally, it should be mounted in the direction of Through Hole.A supply voltage of 4V~15V demonstrates its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.This device allows temperatures in the range of -40°C~125°C TA.Non-Inverting is used as the input type.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27424.Devices are mounted by Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to function with a supply voltage of 14V V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 4A limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Based on its basis, it integrates 2 outputs.The output current of this device can be set to 4A.Its maximum power dissipation of 350mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended to keep the supply current at 1.8mA to ensure greater stabilMosfet gate driversy.Due to its power supply of 4.5/15V, it provides an effective solution to power supply problems for a wide range of applications.When this voltage is produced, it is marked as 330mV.
UCC27424P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 350mW
UCC27424P Applications
There are a lot of Texas Instruments UCC27424P gate drivers applications.
- High power buffers
- Head-up and Head mounted displays
- LCD/LCoS/DLP portable and embedded pico projectors
- Pulse transformer drivers
- 3-Phase Motor Inverter Driver
- DC/DC converters
- Isolated Supplies for Motor Control
- Smart Phones
- Portable Media Players
- Motor Controls
