Parameters |
Output Polarity |
TRUE |
Rise / Fall Time (Typ) |
20ns 15ns |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Independent |
Turn On Time |
0.06 µs |
Output Peak Current Limit-Nom |
4A |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
4A 4A |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
1V 2V |
Turn Off Time |
0.05 µs |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
650mW |
Voltage - Supply |
4V~15V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
14V |
Base Part Number |
UCC27424 |
Pin Count |
8 |
Number of Outputs |
2 |
Max Output Current |
4A |
Power Supplies |
4.5/15V |
Nominal Supply Current |
1.8mA |
Power Dissipation |
650mW |
Output Current |
4A |
Max Supply Current |
1.8mA |
Propagation Delay |
150 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
150 ns |
Output Characteristics |
TOTEM-POLE |
Rise Time |
40ns |
Fall Time (Typ) |
40 ns |
UCC27424QDRQ1 Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tape & Reel (TR) is the packaging method.The device is mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~15V.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Input type of Non-Inverting is used.Its configuration is based on a total of 8 terminations.There are various related parts under its base part number UCC27424.The device is mounted with Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 14V.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 4A limit to the output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A total of 8 pins are available for component connections.There are 2 outputs integrated for its basis.The output current supported by the device is 4A.The maximum power dissipation of 650mW shows its maximum capability to transfer and conduct power loss without overheating.To increase stability, keep the supply current at 1.8mA.Based on its power supplies of 4.5/15V, it solves the problem of power supply failure for a variety of applications.A gate driver in the Automotive, AEC-Q100 series is included in this document.
UCC27424QDRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
Operating with the supply voltage of Automotive, AEC-Q100
UCC27424QDRQ1 Applications
There are a lot of Texas Instruments UCC27424QDRQ1 gate drivers applications.
- RGB applications
- Multicolor LED/laser displays
- Industrial Power Supplies
- DC/DC converters
- Motor Controls
- Isolated Supplies for Motor Control
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- UPS systems
- Isolated switch mode power supplies (SMPS)
- Portable Media Players