UCC27425DG4
| Parameters | |
|---|---|
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27425 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
UCC27425DG4 Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.There is a package in the form of Tube.The device is mounted in the direction of Surface Mount.A supply voltage of 4V~15V demonstrates its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TA.Inverting, Non-Inverting is used as the input type.The configuration starts with 8 terminations.Under its base part number UCC27425, various related parts can be found.Mosfet driver is mounted using the Surface Mount method.In the device, there are 8 pins.In order to operate, a voltage of 14V has to be applied.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 4A volts.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 8 component pins is available.For its basis, there are 2 outputs integrated.The output current can be set to 4A.Using 650mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.For higher stability, the supply current should be kept at 1.6mA.With its power supplies of 4.5/15V, it solves the power supply problems for diverse applications.
UCC27425DG4 Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27425DG4 Applications
There are a lot of Texas Instruments UCC27425DG4 gate drivers applications.
- Solar power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for Motor Control
- Motor Controls
- General Purpose 3-Phase Inverter
- Active filtering
- Isolated switch mode power supplies (SMPS)
- High frequency line drivers
- Motor controllers
- Isolated Supplies for controller area network (CAN),
