UCC27425DGN
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27425 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 3W |
| Output Current | 4A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
UCC27425DGN Overview
For greater flexibility, the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is adopted.The packaging method is indicated by Tube.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 4V~15V V, it is able to demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.-40°C~125°C TA is the allowed temperature range for this device.Inverting, Non-Inverting is used as the input type in this program.The configuration starts with 8 terminations.There are various parts that can be found under its base part number UCC27425.The device is mounted using Surface Mount.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 14V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 4A.There are several useful electronic components found in its subcategory of MOSFET Drivers.8 pins are present on the component.For its basis, there are 2 outputs integrated.The output current of this device can be set to 4A.The maximum power dissipation of 3W shows its maximum capability to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 1.6mA.Due to its 4.5/15V power supply, it can solve power supply problems for an array of diverse applications.
UCC27425DGN Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC27425DGN Applications
There are a lot of Texas Instruments UCC27425DGN gate drivers applications.
- Portable Navigation Devices
- LCD/LCoS/DLP portable and embedded pico projectors
- High-voltage isolated DC-DC converters
- 3-Phase Motor Inverter Driver
- Isolated switch mode power supplies (SMPS)
- Portable Media Players
- PCMCIA applications
- Industrial motor drives - compact, standard, premium, servo drives
- RGB applications
- Motor Drives
