UCC27425DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27425 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27425DR Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tape & Reel (TR).Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4V~15V supply voltage, its superiority can be demonstrated.The gate type on this device is N-Channel, P-Channel MOSFET.Temperature range -40°C~125°C TA is allowed for this device.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number UCC27425.Surface Mount is the way it takes to mount the device.As a result, it is configured with 8 pins when it is designed.This device operates with 14V supply voltage.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 4A.There are various useful electronic components in its subcategory MOSFET Drivers.There are 8 component pins on the board.The basis of the model has 2 outputs integrated.An output current of 4A is supported.Based on its maximum power dissipation of 650mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 1.6mA to ensure greater stabilMosfet gate driversy.Due to its power supplies of 4.5/15V, it solves the power supply problem for a wide range of applications.
UCC27425DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27425DR Applications
There are a lot of Texas Instruments UCC27425DR gate drivers applications.
- High power buffers
- PCMCIA applications
- Solar power supplies
- Smart Phones
- Pulse transformer drivers
- Automotive Applications
- High frequency line drivers
- Motor Controls
- Industrial motor drives - compact, standard, premium, servo drives
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
