UCC27517DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27517 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 4A |
| Operating Supply Voltage | 12V |
| Output Current | 4A |
| Propagation Delay | 19 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.03 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Max Junction Temperature (Tj) | 140°C |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.4V |
| Turn Off Time | 0.03 µs |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27517DBVT Overview
In order to increase flexibility, the package SC-74A, SOT-753 is used.Cut Tape (CT) represents the package.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.This gate type has a IGBT, N-Channel MOSFET design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Inverting, Non-Inverting is used as its input type.It's configured with 5 terminations.There are various parts that can be found under its base part number UCC27517.Mounting the device requires Surface Mount.There are 5 pins available in the device.Mosfet driver is designed specifically to run on 12V volts of power.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4A.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 5.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.The device is capable of delivering a current of 4A.As a rule of thumb, the operating supply voltage should be set to 12V.
UCC27517DBVT Features
Embedded in the Cut Tape (CT) package
Employing a gate type of IGBT, N-Channel MOSFET
5 pins
UCC27517DBVT Applications
There are a lot of Texas Instruments UCC27517DBVT gate drivers applications.
- A/D drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Commercial air-conditioning (CAC)
- Smart Phones
- Portable Navigation Devices
- DC-DC Converters
- Isolated Gate Driver Supplies
- Motor Control
- Industrial motor drives - compact, standard, premium, servo drives
- Motor controllers
