UCC27519DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | UCC27519 |
| Number of Outputs | 1 |
| Max Output Current | 4A |
| Operating Supply Voltage | 12V |
| Output Current | 4A |
| Propagation Delay | 25 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Rise Time | 12ns |
| Fall Time (Typ) | 11 ns |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27519DBVT Overview
Its SC-74A, SOT-753 package is adopted for higher flexibility.A packaging method of Tape & Reel (TR) is indicated.In this case, gate drivers is mounted along the way of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~140°C TJ.Mosfet driver accepts input of type Non-Inverting.There are 5 terminations to form the base of its configuration.There are various related parts under its base part number UCC27519.The mount method is Surface Mount.The pins are configured with 5 when designing the chip.In order to operate, a voltage of 12V has to be applied.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 4A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.For its basis, there are 1 outputs integrated.The output current can be set to 4A.Mosfet gate drivers is recommended that 12V be set as the operating supply voltage.
UCC27519DBVT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
5 pins
UCC27519DBVT Applications
There are a lot of Texas Instruments UCC27519DBVT gate drivers applications.
- serial peripheral interface (SPI), I2C
- Isolated Supplies for Motor Control
- Automotive Applications
- A/D drivers
- RGB applications
- Telecom switch mode power supplies
- Smart Phones
- Motor Drives
- 3-Phase Motor Inverter Driver
- General Purpose 3-Phase Inverter
