UCC27523DSDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27523 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5A |
| Output Current | 5A |
| Propagation Delay | 23 ns |
| Input Type | Inverting |
| Turn On Delay Time | 23 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 10 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.3V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27523DSDT Overview
Its 8-WDFN Exposed Pad package is adopted for higher flexibility.Gate drivers is packaged in the way of Cut Tape (CT).Surface Mount is mounted in the way.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.-40°C~140°C TJ is the allowed temperature range for this device.Inverting is used as its input type.The configuration is based on 8 terminations.Numerous related parts are available for its base part number UCC27523.Devices are mounted by Surface Mount.In the device, there are 8 pins.The device is specifically designed to function with a supply voltage of 12V V.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.Mosfet driver is possible for the output current to be as low as 5A.There are several useful electronic components found in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.There are 2 outputs integrated for its basis.5A is the maximum output current supported by the device.During the operation of the system, the voltage of the operating supply should be set to 12V.
UCC27523DSDT Features
Embedded in the Cut Tape (CT) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
UCC27523DSDT Applications
There are a lot of Texas Instruments UCC27523DSDT gate drivers applications.
- RGB applications
- Head-up and Head mounted displays
- Video amplifiers
- Portable Navigation Devices
- Isolated switch mode power supplies (SMPS)
- Commercial and agricultural vehicles (CAV)
- Smart Phones
- Uninterruptible Power Supplies (UPS)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- General Purpose 3-Phase Inverter
