UCC27524DSDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27524 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Output Current | 5A |
| Propagation Delay | 23 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 23 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 10 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.3V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27524DSDR Overview
A higher degree of flexibility is achieved by adopting its 8-WDFN Exposed Pad package.A package of Tape & Reel (TR) has been used.Surface Mount is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.IGBT, N-Channel MOSFET is the gate type used for this design.-40°C~140°C TJ is the allowed temperature range for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Initially, the configuration is composed of 8 terminations.There are numerous related parts listed under its base part number UCC27524.The mount method is Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to function with a supply voltage of 12V V.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 5A can be achieved at maximum power.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The component has 8 pins.There are 2 outputs integrated for its basis.Mosfet gate drivers supports a current output of 5A.Mosfet gate drivers is recommended that you set the operating supply voltage to 12V.
UCC27524DSDR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
UCC27524DSDR Applications
There are a lot of Texas Instruments UCC27524DSDR gate drivers applications.
- Telecom switch mode power supplies
- Pulse transformer drivers
- Portable Media Players
- 3-Phase Motor Inverter Driver
- Industrial Motor Inverter - Power Tools, Robotics
- Refrigerator
- High current laser/LED systems
- Automotive Applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated switch mode power supplies (SMPS)
