UCC27525DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27525 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5A |
| Output Current | 5A |
| Propagation Delay | 23 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 23 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 10 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.3V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27525DGN Overview
For greater flexibility, its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is used.Tube represents the package.Its recommended mounting way is Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.8 terminations constitute its foundation.Many related parts can be found under its base part number UCC27525.The device is mounted with Surface Mount.A total of 8 pins are available on the device.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 5A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 8 component pins is available.The basis of this system consists of 2 outputs.This device is capable of delivering 5A current.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V.
UCC27525DGN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
UCC27525DGN Applications
There are a lot of Texas Instruments UCC27525DGN gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- serial peripheral interface (SPI), I2C
- Solar power supplies
- Motor Controls
- High-voltage isolated DC-DC converters
- 3-Phase Motor Inverter Driver
- Isolated Gate Driver Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Modules
