UCC27525DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Base Part Number | UCC27525 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Output Current | 5A |
| Propagation Delay | 23 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 23 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 10 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.3V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27525DR Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Cut Tape (CT) represents the packaging method.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.There is a gate type of IGBT, N-Channel MOSFET in this design.There is a temperature range for this device of -40°C~140°C TJ.The input type is Inverting, Non-Inverting.Mosfet driver is based on 8 terminations.There are various related parts under its base part number UCC27525.Mosfet driver is mounted using the Surface Mount method.A total of 8 pins are available on the device.Specification is for 12V supply voltage operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.Mosfet driver is possible for the output current to be as low as 5A.There are several useful electronic components in this subcategory of MOSFET Drivers.The number of component pins is 8.Mosfet driver is based on a basis of 2 outputs that have been integrated.Mosfet gate drivers supports a current output of 5A.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V.
UCC27525DR Features
Embedded in the Cut Tape (CT) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
UCC27525DR Applications
There are a lot of Texas Instruments UCC27525DR gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- PCMCIA applications
- Portable Media Players
- Digitally controlled power supplies
- Video amplifiers
- Refrigerator
- Motor Control
- Isolated switch mode power supplies (SMPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
