UCC27526DSDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27526 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5A |
| Output Current | 5A |
| Propagation Delay | 23 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 23 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 18ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.3V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27526DSDR Overview
There is greater flexibility with the 8-WDFN Exposed Pad package.Tape & Reel (TR) represents the packaging method.Its recommended mounting way is Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~140°C TJ.The input type for this program is Inverting, Non-Inverting.Its configuration starts with 8 terminations.Many related parts can be found under its base part number UCC27526.Mosfet driver is mounted using the Surface Mount method.When the device is designed, it has 8 pins.A voltage of 12V is required for its operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 5A limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.The board has 8 component pins.For its basis, 2 outputs are integrated.The output current supported by the device is 5A.The operating supply voltage should be set at 12V.
UCC27526DSDR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
UCC27526DSDR Applications
There are a lot of Texas Instruments UCC27526DSDR gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- DC-DC Converters
- High-speed communications
- White Goods - Air Conditioner, Washing Machine,
- General Purpose 3-Phase Inverter
- Industrial Power Supplies
- Portable Navigation Devices
- A/D drivers
- Portable computers
- AC-DC Inverters
