UCC27526DSDT
| Parameters | |
|---|---|
| Turn On Delay Time | 23 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 18ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.3V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 10.886217mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27526 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Operating Supply Current | 5A |
| Output Current | 5A |
| Propagation Delay | 23 ns |
| Input Type | Inverting, Non-Inverting |
UCC27526DSDT Overview
Its 8-WDFN Exposed Pad package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.Surface Mount is the way in which it is mounted.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~140°C TJ.Inverting, Non-Inverting is used as its input type.8 terminations constitute its foundation.You will find various related parts under the base part number UCC27526.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.In order to operate, a voltage of 12V has to be applied.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.Mosfet driver is possible to achieve a maximum output current of 5A.There are various useful electronic components in its subcategory MOSFET Drivers.The component has 8 pins.The basis of this system consists of 2 outputs.Mosfet gate drivers can deliver a current of 5A.Mosfet gate drivers is recommended that 12V be set as the operating supply voltage.Mosfet gate drivers operates wMosfet gate driversh the supply voltage of 5A.
UCC27526DSDT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
UCC27526DSDT Applications
There are a lot of Texas Instruments UCC27526DSDT gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High power buffers
- RGB applications
- Solar power supplies
- Pulse transformer drivers
- DC-DC Converters
- A/D drivers
- Portable computers
- High-voltage isolated DC-DC converters
- UPS systems
