UCC27528QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC27528 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Current | 125μA |
| Output Current | 5A |
| Max Supply Current | 225μA |
| Input Type | Non-Inverting |
| Rise Time | 7ns |
| Fall Time (Typ) | 6 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27528QDRQ1 Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tape & Reel (TR) is the packaging method.Surface Mount is mounted in the way of the device.A supply voltage of 4.5V~18V demonstrates its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~140°C TJ.Non-Inverting is used as the input type.There are 8 terminations to form the base of its configuration.There are numerous related parts listed under its base part number UCC27528.Surface Mount is the way it takes to mount the device.Mosfet driver is configured wMosfet driverh 8 pins when designing.A supply voltage of 12V is required for operation.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 5A.There are 2 outputs integrated for its basis.Mosfet driver supports an output current of 5A.For higher stability, the supply current should be kept at 225μA.Among the Automotive, AEC-Q100 series, this gate driver is included.Powered by 125μA volts, it operates on a constant current.
UCC27528QDRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Operating with the supply voltage of Automotive, AEC-Q100
UCC27528QDRQ1 Applications
There are a lot of Texas Instruments UCC27528QDRQ1 gate drivers applications.
- A/D drivers
- Portable Navigation Devices
- Power factor correction (PFC) circuits
- Video amplifiers
- High power buffers
- Automotive Applications
- Pulse transformer drivers
- 3-Phase Motor Inverter Driver
- Telecom switch mode power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
