UCC27532DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Voltage - Supply | 10V~32V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC27532 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 5A |
| Nominal Supply Current | 2.5A |
| Output Current | 5A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 26 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 26 ns |
| Rise / Fall Time (Typ) | 15ns 7ns |
| Interface IC Type | HALF BRIDGE BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 5A |
| Logic Voltage - VIL, VIH | 1.2V 1.7V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27532DBVT Overview
There is greater flexibility with the SOT-23-6 package.A package of Tape & Reel (TR) has been used.Configuration is based on 1 drivers.Surface Mount is mounted in the way.In the absence of a 10V~32V supply voltage, its superiority can be demonstrated.IGBT, N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Input type of Non-Inverting is used.It's configured with 6 terminations.There are various parts that can be found under its base part number UCC27532.The device is mounted with Surface Mount.There are 6 pins available in the device.The device is specifically designed to operate at 18V volts.HALF BRIDGE BASED IGBT/MOSFET DRIVER is employed as its interface IC.There is an output current limit of 5A for this device.Several electronic components are included in its subcategory of Peripheral Drivers.Based on its basis, it integrates 2 outputs.Mosfet driver supports an output current of 5A.
UCC27532DBVT Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
6 pins
UCC27532DBVT Applications
There are a lot of Texas Instruments UCC27532DBVT gate drivers applications.
- Industrial Power Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Smart Phones
- 3-Phase Motor Inverter Driver
- Motor Controls
- Portable computers
- PCMCIA applications
- DC-DC Converters
- DC/DC converters
- Digitally controlled power supplies
