UCC2800D

8 Terminals 6.9V~12V 8-Pin UCC2800 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2800D
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 788
Description: 8 Terminals 6.9V~12V 8-Pin UCC2800 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC2800
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	5.075V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Output Current	1A
Voltage - Supply (Vcc/Vdd)	6.9V~12V
Control Features	Frequency Control
Input Voltage (Min)	7.5V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	46kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Duty Cycle (Max)	99%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2800D Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 6.9V~12V. Qualified to work in an dc switcher with -40°C~85°C TA. In this switching controller, the switch can be set to 46kHz. dc dc regulator can be generalized using Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 8. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC2800". Total pins of switching converter are 8. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 7.5V. According to the test statistics, DC regulator outputs 5.075V voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The switching controller works at a frequency of 1MHz. The supply voltage should be 10V. There should be 25mA current exceeding 25mA supplied to the controller. There is 500μA nominal current supply for this the controllers dc.