UCC2800DG4

8 Terminals 6.9V~12V 8-Pin UCC2800 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2800DG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 492
Description: 8 Terminals 6.9V~12V 8-Pin UCC2800 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 46kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	10V
Frequency	1MHz
Base Part Number	UCC2800
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	5.075V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Power Dissipation	650mW
Output Current	1A
Voltage - Supply (Vcc/Vdd)	6.9V~12V
Control Features	Frequency Control
Input Voltage (Min)	7.5V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	46kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	25mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Switcher Configuration	SINGLE
Max Duty Cycle	100 %
Input Current	500μA
Duty Cycle (Max)	99%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2800DG4 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 6.9V~12V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 46kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 8 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. In addition to "UCC2800", there are other relevant dc to dc converter ics you can find. There are a total of 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 7.5V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 5.075V voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. A frequency of 1MHz is set for the switching controller. A supply voltage of 10V is required. There should be 25mA more than 25mA amps of current supplied to the controller. An input of 500μA current flow could satisfy the operation of the switching converter .