UCC2800NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC2800 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 7.5V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2800NG4 Overview
With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's6.9V~12V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. The switching controller can be switched at 46kHz. As it has a Through Hole value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. In addition to "UCC2800", there are other relevant dc to dc converter ics you can find. 8 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 7.5V. Test statistics indicate DC regulator outputs 1V voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Through Hole makes DC switcher ideal for most prototype and application designs. Switching controllers work at 1MHz Hz. The supply voltage should be 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current.
UCC2800NG4 Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC2800NG4 Applications
There are a lot of Texas Instruments UCC2800NG4 DC to DC converter applications.
- SMT equipment
- Fire elevators
- Television equipment
- Servo drive system
- Printing equipment
- Communication system
- Computer monitoring equipment of building
- Solar power plants
- Flaw detection equipment
- Special machining machine tools
