UCC2800PWTRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2800 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 7.5V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 46kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
UCC2800PWTRG4 Overview
In the 8-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 6.9V~12V and has a 6.9V~12V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. There is a switch at 46kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Various 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Searching "UCC2800" will return other relevant dc to dc converter ics. Switching converter has a total of 8 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 7.5V. According to the test statistics, DC regulator outputs 1V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Switching controllers work at 1MHz Hz.
UCC2800PWTRG4 Features
Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC2800PWTRG4 Applications
There are a lot of Texas Instruments UCC2800PWTRG4 DC to DC converter applications.
- Ball screw pair
- Flaw detection equipment
- Computer application technology
- Sensitive electronic devices
- Correction machines
- Thermal power
- Scientific testing
- Sink circuits
- Emergency lighting monitoring equipment
- Communication system
