UCC28019DG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Frequency | 65kHz |
| Pin Count | 8 |
| Input Voltage-Nom | 15V |
| Power Supplies | 15V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 22V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Operating Supply Current | 7mA |
| Power Dissipation | 650mW |
| Input Voltage (Min) | 10V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 65kHz |
| Input Voltage (Max) | 21V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Current - Input | 7mA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
UCC28019DG4 Overview
Packaged in a SOIC format.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER type.The gadget has several 8 terminals.A component's pin number remains 8.There is a switching frequency of 65kHz.There are 8 pins in this board, which make up its sum.With a minimum input voltage of 10V, it can function.In a way, it can be considered as a subclass of Switching Regulator or Controllers.There is a maximum voltage (Max) for its input.Keeping its frequency at 65kHz allows it to maintain good accuracy.As far as output current is concerned, it works in 2AA 15V-volt supply is always used to power the component.The device's supplies are 15V.In this case, the supply current of the gadget is set to 7mA.As soon as it is turned on, it should be warmer than -40°C.When this temperature is reached, 125°C is the maximum operating temperature.22V is the only voltage that it can work with.The unit can only be powered by -300mV volts.
UCC28019DG4 Features
UCC28019DG4 Applications
There are a lot of Texas Instruments UCC28019DG4 PFC PMICs applications.
- Noise filters
- SCP configurator
- Pressure sensor
- CPU power supply
- VCO (Voltage-Controlled Oscillator)
- Temperature monitoring
- Dashboards
- Analog datalogger
- RF (Radio Frequency)
- Car sunroof
