UCC28019P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 10V~21V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Base Part Number | UCC28019 |
| Pin Count | 8 |
| Output Voltage | 12.5V |
| Input Voltage-Nom | 15V |
| Supply Voltage-Max (Vsup) | 22V |
| Power Supplies | 15V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 1W |
| Output Current | 1.5A |
| Max Supply Current | 10mA |
| Input Voltage (Min) | 10V |
| Input Voltage (Max) | 21V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Input Current | 7mA |
| Mode | Continuous Conduction (CCM) |
| Current - Startup | 100μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC28019P Overview
The package is 8-DIP (0.300, 7.62mm)-shaped.A Tube-package is used.It has a Through Hole mounting type.It should operate with the voltage supply of 10V~21V.-40°C~125°C is the device's operating mode.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.The gadget has a number of 8 terminals on the back of it.100μA represents the startup current.It should be noted that the pin number of this component remains at 8.Best part of the device has a UCC28019 in it.8 pins are arranged in a sum.It can function with a minimum input voltage of 10V.It's a subclass of Switching Regulator or Controllers in a way.21V is the maximum input voltage (Max) of this device.A frequency of 65kHz allows it to continue operating with a good level of accuracy.As a rule of thumb, the component is always powered by a 15V volt supply.As long as the supply temperature is at least 10mA, the device will work.Supply 15V is the device's supply.7mA is the device's supply current.Operation can be performed by using the 12.5V output.
UCC28019P Features
UCC28019P Applications
There are a lot of Texas Instruments UCC28019P PFC PMICs applications.
- CPU power supply
- Bypass circuit
- Position detection
- Arduino servo control
- Analog control systems
- eBike
- Semi-automation
- Low-voltage microprocessor power supplies
- Low Noise Instrumentation
- Engine management
