UCC2802D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.075V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2802D Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The AC/DC power converter is available in Tube .Surface Mount mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~85°C TA degrees Celsius.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.There is Up to 1MHz switching frequency.As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~12V , the AC/DC converter may be used.There have been 8 terminations of this program.On the ac/dc converter, there are 8 pins.A total of 8 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .Based on the UCC2802 family, you can search for similar acdc converters.A total of 1 outputs need to be run.Switching Regulator or Controllers contains the ac to dc conversions.It has been set to 1A for the output current.It produces a voltage of 5.075V .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .At all times, this AC to DC converter should be set to 10V .
UCC2802D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2802D Applications
There are a lot of Texas Instruments UCC2802D AC DC Converters applications.
- Standby power supplies for TV
- Portable audio
- AC?DC USB chargers for Cell Phones
- Handheld/Battery-Powered Systems
- Set -Top Box (STB) Power Supply
- Cellular phone chargers
- Vacuum Cleaner
- Cleaners
- SMPS house keeping power supplies
- Portable Apparatus
